Publications on QCM-D
Look up relevant references by searching our publication archive containing hundreds of abstracts to peer reviewed articles citing Q-Sense. The database is updated on a regular basis to include most publications presenting QCM-D data.
Application notes using Q-Sense systems are found in the category applications. If you know of any publications in which QCM-D has been used that you cannot find in the database, please let us know.

For information on our applications, products and the QCM-D technology you are welcome to contact us.
Displaying publications 1-10 of 1359.
| Year |
Title |
Authors |
Journal |
Abstract |
| 2013 |
Gas Flows near Solids Coated with Thin Water Films |
Dongjin Seo , Dean Mastropietro , and William A. Ducker * |
J. Phys. Chem. C, 2013, 117 (12), pp 6235–6244 |
We determined the tangential momentum accommodation coefficient (TMAC) of nitrogen gas at glass surfaces that were coated in thin water films produced by controlling the humidity. The accommo… |
| 2013 |
Non-specific interactions between soluble proteins and lipids induce irreversible changes in the properties of lipid bilayers |
Francesca Ruggeri 1, Fan Zhang 2, Tania Lind 1, Erica D. Bruce 2, Boris L. T. Lau 2 and Marité Cárdenas 1 |
Soft Matter, 2013,9, 4219-4226 |
Soluble proteins in the extracellular matrix experience a crowded environment. However, most of the biophysical studies performed to date have focused on protein concentrations within the dil… |
| 2013 |
Bioinspired and Highly Oriented Clay Nanocomposites with a Xyloglucan Biopolymer Matrix: Extending the Range of Mechanical and Barrier Properties |
Joby J Kochumalayil 1, Malin Bergenstråhle-Wohlert 1 2, Simon Utsel 1, Lars Wågberg 1 2, Qi Zhou 2 3, and Lars A Berglund *1 2 |
Biomacromolecules, 2013, 14 (1), pp 84–91 |
The development of clay bionanocomposites requires processing routes with nanostructural control. Moreover, moisture durability is a concern with water-soluble biopolymers. Here, oriented bio… |
| 2013 |
Design of Mixed PEO/PAA Brushes with Switchable Properties Toward Protein Adsorption |
M. F. Delcroix 1, G. L. Huet 1, T. Conard 2, S. Demoustier-Champagne 1, F. E. Du Prez 3, J. Landoulsi 4, and C. C. Dupont-Gillain *1 |
Biomacromolecules, 2013, 14 (1), pp 215–225 |
Adsorption of proteins at interfaces is an ubiquitous phenomenon of prime importance. Layers of poly(ethylene oxide) (PEO) are widely used to repel proteins. Conversely, proteins were shown t… |
| 2013 |
Control over the Gradient Differentiation of Rat BMSCs on a PCL Membrane with Surface-Immobilized Alendronate Gradient |
Yang Zhu 1, Zhengwei Mao 1, and Changyou Gao * 1 2 |
Biomacromolecules, 2013, 14 (2), pp 342–349 |
Gradient biomaterials can offer progressively changing signals to specific tissue interface, and thereby modulate the conjunction between different tissues. A linear density gradient of alend… |
| 2013 |
Specific Binding of Immunoglobulin G with Bioactive Short Peptides Supported on Antifouling Copolymer Layers for Detection in Quartz Crystal Microgravimetry and Surface Plasmon Resonance |
Yanxia Zhang *1, Nafisa Islam 2, Ruben G. Carbonell 2, and Orlando J. Rojas *1 2 |
Anal. Chem., 2013, 85 (2), pp 1106–1113 |
A new peptide-based system supported on copolymer brushes grafted from gold sensors and with resistance to nonspecific adsorption is reported for selective binding of human immunoglobulin G… |
| 2013 |
On the Surface Interactions of Proteins with Lignin |
Carlos Salas 1 2, Orlando J. Rojas * 1 3 , Lucian A. Lucia 1, Martin A. Hubbe 1, and Jan Genzer 3 |
ACS Appl. Mater. Interfaces, 2013, 5 (1), pp 199–206 |
Lignins are used often in formulations involving proteins but little is known about the surface interactions between these important biomacromolecules. In this work, we investigate the intera… |
| 2013 |
Facile Phenylboronate Modification of Silica by a Silaneboronate |
Robert Pelton *1, Yuguo Cui 1, Dan Zhang 1, Yang Chen 2, Kate L. Thompson 3, Steven P. Armes 3, and Michael A. Brook 2 |
Langmuir, 2013, 29 (2), pp 594–598 |
Macroscopic and colloidal silica surfaces were readily modified with alkoxysilaneboronate, IV, yielding silica surfaces with covalently bonded phenylboronic acid groups. XPS and neutron activ… |
| 2013 |
Fusion of Bolaamphiphile Micelles: A Method to Prepare Stable Supported Biomimetic Membranes |
Y. Kaufman 1 2, S. Grinberg 3, C. Linder 4 2, E. Heldman 5, J. Gilron 2, and V. Freger *6 |
Langmuir, 2013, 29 (4), pp 1152–1161 |
Supported biomimetic membranes (SBMs) on solid substrates have been commonly prepared from vesicle-forming double-tail lipids, such as zwitterionic phospholipids, using the method of vesicle… |
| 2013 |
Design and Implementation of Two-Dimensional Polymer Adsorption Models: Evaluating the Stability of Candida antarctica Lipase B/Solid-Support Interfaces by QCM-D |
Sara V. Orski 1, Santanu Kundu 1, Richard Gross *2, and Kathryn L. Beers *1 |
Biomacromolecules, 2013, 14 (2), pp 377–386 |
A two-dimensional model of a solid-supported enzyme catalyst bead is fabricated on a quartz crystal microbalance with dissipation monitoring (QCM-D) sensor to measure in situ interfacial stab… |